Assessment Validation and You: Steps to Validate Assessments
Assessment Validation and You: Steps to Validate Assessments
Blog Article
With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.
Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.
Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.
The SRTOs 2015 Clause 1.8 specifies that RTOs need to ensure compliance of their assessment systems, including RPL, with training package requirements, following the Principles of Assessment and Rules of Evidence.
We are required by the standards to carry out two types of validation.
The initial assessment validation ensures your RTO's assessments comply with the training package requirements.
The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.
Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.
What are the Two Types of Assessment Validation?
Breaking Down Assessment Validation
As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.
On the other side, post-assessment validation pertains to the implementation, requiring Registered Training Organisations to adhere to the Principles of Assessment and Rules of Evidence.
This piece will highlight assessment tool validation.
Guidelines for Conducting Assessment Tool Validation
Now that we understand the two types of validation, let’s explore the details of assessment tool validation.
Ideal Times to Conduct Assessment Tool Validation
Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
There's no requirement to wait for the next validation schedule in your 5-year cycle. Validate new resources promptly to ensure they’re appropriate for students.
Still, this isn't the sole reason for conducting this type of validation. Conduct assessment tool validation when you:
- you update your resources
- you add new training products on scope
- reviewing your course against training product updates
- identify your learning resources as a risk during your risk assessment
ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.
What Training Products Need Validation?
Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.
Resources Needed to Start Assessment Tool Validation
Learning Resources
As you validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.
Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.
Validation Panel
Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.
As a group, your validation panel must possess:
Relevant vocational competencies and industry skills applicable to the unit being validated
Current knowledge and skills related to vocational teaching and learning
Either one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its updated version
Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It serves as documentation that you have validated your resources prior to student use.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates simplify validation, they can lead to judgment errors due to limited space for comments on each assessment item.
We strongly suggest using a more detailed template to evaluate each unit requirement and its corresponding assessment items. Here is an example:
Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Requires Checking?
As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.
Assessment Basic Principles
Fairness – Are equal opportunities and access ensured in the assessment process?
Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?
Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?
Essential Rules of Evidence
Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Even though these are regularly addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To prevent using learning resources that do not address some unit requirements, ensure you adhere to these guidelines:
Demonstrate What You Teach
Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
nappy change
bottle preparation, bottle-feeding infants, and cleaning equipment
prepare solids and feed infants
appropriately respond to baby signs and cues
prepare babies for sleep and soothe them
monitor and foster physical exploration and gross motor skills appropriate for the age
Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
Entire or Not Competent
Pay attention to lists. As mentioned earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Be More Specific?
Every assessment item needs clear and specific benchmark answers to guide check here the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What type of information can be included in a work package?
Possible answers include:
Mandatory resources
Associated expenses
Time assigned for activities
Allocated duties and responsibilities
When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.
This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:
Name a hazard and/or environmental issue in the work area and choose the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – work area isolation, engineering controls, PPE
Work area and ground conditions – elimination, isolation, engineering controls
People – isolation, engineering, administration
Structural hazards – substituting, isolation, engineering controls
Chemical hazards – isolating, engineering, administration
Equipment or machinery – isolation, use of engineering controls, administration
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.